Gorilla for Tevo Tarantula

v 1.1

• added some thickness to the grill's flap and adjust slightly the height.
• added a no holes version for your customisation!

Fan Grill:

• print the first layer slowly 10mm/s
• 3 perimeters=1.2
• 4 top/bottom layers
• 20% infill
• minimum layer time: 10s

Fan Duct :

This fan duct produces amazing 100mm-30mm/s overhangs as you can see on the picture

• No supports (just for the screw mounts if you want to add)
• 25% infill or less, 4 perimeters, 3 top/bottom layers
• You may need to cut your blower's left screw mount a bit (just use pliers)
• to install the tube pinch the tube and slide it in
• this is a tight fit, so be sure to file all the blogs inside the fan mount.
• To mount the fan on the duct insert the lower corner first and rotate

-> BLTOUCH Mount

Note: If you want more modifications for sensors, Import the design on thinkercad.com and combine a sensor mount yourself. There's plenty of them pre made on that site Sorry but I can't please everyone.