Suitable for paint bottles 25 mm and below, with a 3 mm end connector

Be sure to read the following instructions before use (especially when using a non-adjustable rotary tool):

1. During usenever point it at peopleor valuable items.

2. PETG is strongly recommended; field tests show it offers stable durability over long-term use;PLA is not recommended for printing, but if you choose to try it, be sure to take adequate safety precautions.

3. Strictly control the rotational speed: when using the rotary tool to stir paint, always operate in tap-and-stop mode—briefly press the switch to stop immediately, then repeatedly start and stop intermittently! Rotary tools operate at extremely high speeds, and continuous high-speed operation poses significant risks; if used in conjunction with a hand drill, apply gentle pressure to control the speed, and never allow prolonged high-speed operation.

4.You must hold the rotary tool firmly during operation,if using a rotary tool, the vibration can be quite strong, so we recommend holding it with both hands, to prevent the device from swinging or slipping and causing accidents.

5. After printing is completeplease first checkwhether the connecting rod and the main body are securely fastened, to avoid parts breaking off during rotation.

6. Qingniao Chuan Paint canclick to downloadthis model, which has been custom-designed for greater stability.