I only managed to purchase 10x2mm magnets, but I was worried the magnetic strength might not be sufficient, so I decided to embed three magnets internally—plus, to enhance the aesthetic appeal, I sealed the magnets completely within the print!

The magnets are positioned 1mm above the top surface, with a layer height of 0.2mm; therefore, I set the printer to pause after printing approximately 230 layers—be sure to insert the magnets at that point!

Attachments:

- The magnet cavities have a diameter of 10.1mm and a depth of 6.1mm, with a 1mm sealing layer on the top surface.

- You’ll need six magnets measuring 10x2mm in size.