Chiikawa/Usagi/Hachiware categorized storage tray/cat bowl—uploaded both an all-in-one print version requiring multi-color printing and a separate-part version that does not require multi-color printing.

(To ensure the final quality and texture, the model has not been simplified; therefore, loading may take a bit longer. Please be patient!)

The dimensions of the multi-color all-in-one print version are as follows:

• Chiikawa’s length × width × height is approximately 155 × 134 × 32 mm, with each piece requiring 71 g of filament; total printing time is about 2 hours and 6 minutes.

• Usagi’s length × width × height is approximately 155 × 174 × 32 mm, with each piece requiring 83.5 g of filament; total printing time is about 2 hours and 25 minutes.

• Hachi’s length × width × height is approximately 155 × 142 × 32 mm, with each piece requiring 108 g of filament; total printing time is about 2 hours and 50 minutes. (The blue bangs and the main facial portion of Hachi are designed as separate parts, allowing the blue section to be removed independently.)

The dimensions of the separated-part print version are as follows:

• Chiikawa’s length × width × height is approximately 180 × 153 × 37 mm, with each piece requiring 95 g of filament; total printing time is about 2 hours and 36 minutes.

• Usagi’s length × width × height is approximately 160 × 180 × 33 mm, with each piece requiring 87 g of filament; total printing time is about 2 hours and 35 minutes.

• Hachi’s length × width × height is approximately 180 × 165 × 37 mm, with each piece requiring 148 g of filament; total printing time is about 3 hours and 50 minutes. (The blue bangs and the main facial portion of Hachi are designed as separate parts, allowing the blue section to be removed independently.)

You can also scale up the prints proportionally according to your personal needs.

The colors used in the physical samples are:

1. Matte yellow PLA (for Usagi’s main body);

2. Black PLA (for the facial expressions of the three little ones);

3. Pink PLA (for the blush on the cheeks of the three little ones);

4. White PLA (for the main bodies of Hachi and Chiikawa);

5. Sky-blue PLA (for Hachi’s bangs);

Colors can be adjusted to suit individual preferences.

(For example, if all three little ones need to be printed, you can place Chiikawa and Hachi’s main bodies on one tray to save time switching filaments.)

With its simple structure and adorable design, all printing settings have been thoroughly tested. Even using the default 0.4 mm nozzle setting, the results are excellent—give it a try!