Toys
Assembly
Model
Chainmail
Geometry
Coaster
Series
Assembly
Decorative Figurine
Regular pentagon
Pause multi-color
3D-printed fabric

17
11
此系列模型以几何正五边形为基础单元,采用卡扣式铰链结构进行连接,可随心拆装组合,柔软如布料。
本次发布的版本为正五边形单元的第三组
可点击这里查看更多版本:
后续会陆续发布更多版本组合。
由于该系列模型是需要进行拼装组合的,需要一定的零件配合度,打印前务必要
做好流量校准!
做好流量校准!
做好流量校准!
否则可能会造成但不限于:一、装配不上;二、装配过松。
因连杆部分较小,几乎贴近FDM打印机的最小极限,加之FDM打印件的强度,请选用强度和层粘有一定强度的耗材,经多次打印测试,最低要求耗材为PLA Basic,大部分丝绸类是强度是很弱的,尤其是层粘方面,拆装时连杆很容易就坏了,成了一次性的。
当前组合各个版本组装简单示意图以及组装后(一体打印)的实物图展示如下
1.五_1.5-A

2.五_1.5-B

3.五_1.5-C

本组模型多色的实现是通过在指定高度设置暂停打印后手动更换相应的耗材,不在乎吐丝废料的可通过指定高度涂色用多色系统自动更换耗材来实现。
由于含有细小部件(连杆),
请务必远离5岁以下儿童及婴儿,以防意外吞食!
请务必远离5岁以下儿童及婴儿,以防意外吞食!
请务必远离5岁以下儿童及婴儿,以防意外吞食!
该版本组为此平台首发,请勿私自搬运发布其他平台!请勿商用!仅供个人研究娱乐,感谢理解与配合。
最后祝您打印愉快,组装出属于自己的锁子甲!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(6)
组合甲 1.5-A.stlDesigner29.14 MB
2026-04-14
组合甲&基础单元&暂停换色 五_1.5-A.3mfDesigner1.35 MB
2026-04-14
组合甲 1.5-B.stlDesigner37.79 MB
2026-04-14
组合甲&基础单元&暂停换色 五_1.5-B.3mfDesigner1.71 MB
2026-04-14
组合甲 1.5-C.stlDesigner50.79 MB
2026-04-14
组合甲&基础单元&暂停换色 五_1.5-C.3mfDesigner2.21 MB
2026-04-14
View all(6)



























