Additional Accessories Required

1. 5V Battery Box with LED Strip
https://mobile.yangkeduo.com/goods2.html?ps=47hfMtNXfU

2. 25mm Diameter Magnets
https://mobile.yangkeduo.com/goods.html?ps=S8Ee6cY71e

3. Toggle Switch
【Taobao】https://e.tb.cn/h.ieynXfIPSgbCcwf?tk=vYGVUEhjcno MF287 “UL‑Certified TUV Toggle Switch for LED Wall Lights, Retro Design, with Push-Pull Function and Power Cord – Perfect for Lighting Fixtures”
Click the link to open directly, or search on Taobao to access the product.

4. COB LED Strip with Solderless Connectors
https://mobile.yangkeduo.com/goods.html?ps=d0hmoj8p9v

Installation Instructions
1. The two circular holes in the base are designed to accommodate the magnets—make sure you don’t install them backward. These magnets are single-sided magnetic; if installed incorrectly, they won’t generate any magnetic force. Test the alignment carefully before securing them, then press down firmly until they snap into place—they’ll lock in tightly.
2. The toggle switch must be connected to the power cable of the battery box; this requires cutting the wire and soldering the connections. Only this specific type of toggle switch is compatible—its mounting slot was designed specifically for this switch, ensuring a secure fit and eliminating concerns about loosening over time.
3. The LED strip needs to be trimmed at both ends, with the middle section connected using solderless connectors, then securely mounted onto the base plate that features circular mounting holes. Be careful not to reverse the positive and negative terminals when connecting the power supply—if you have a soldering iron at home, you can skip purchasing this connector altogether.