Subwoofer
Print Profile(10)
- 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PLA
Designer
21
0
Released 2026-02-18
- This is a compact, low‑frequency speaker featuring a Bluetooth audio module that allows users to adjust the pitch and volume, as well as connect via Bluetooth.
- Printed using the default settings of the Tiertime A1 mini printer, this design was split into multiple components due to its large size—each part can be printed separately and then assembled using screws (which require pre‑drilled holes) or adhesive.
Bill of materials
- NameQuantityNotes
- 1电池1
- 23mm螺丝20
- 3ZK-MT21 2.1声道蓝牙数字功放模块1
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Models(10)
- 右上.3mfDesigner
31.85 KB
2026-02-18
- 功放盒.3mfDesigner
46.05 KB
2026-02-18
- 右下盖.3mfDesigner
37.63 KB
2026-02-18
- 右下.3mfDesigner
32.74 KB
2026-02-18
- 左上.3mfDesigner
31.77 KB
2026-02-18
- 左下.3mfDesigner
35.93 KB
2026-02-18
- 左上盖.3mfDesigner
37.17 KB
2026-02-18
- 左下盖.3mfDesigner
27.57 KB
2026-02-18
- 右上盖.3mfDesigner
37.12 KB
2026-02-18
- 功放盖.3mfDesigner
27.52 KB
2026-02-18
View all(10)
No more
