Pikachu didn’t want to stay inside the Poké Ball, so as soon as the lid was opened, it unleashed a powerful 100,000-volt shock and leapt out!!!

To fulfill children’s wish of having a complete Pikachu, this model features an entirely intact Pikachu figure that can be freely removed or placed back inside.

This model requires purchasing a magnetic LED strip for assembly (with magnets kept well away from the lights).

I chose the following type, available in lengths of 20–50 cm—20 cm fits perfectly through the special-effect component, while 50 cm provides extra length to illuminate the bottom support block:

The special-effect component can pass through this small light strip; the assembly diagram is shown below:

The charging motherboard is glued into the pre‑reserved recess, while the magnetic control module is attached to the front’s embedded hole and pushed all the way inward.

Due to the tiny color blocks on Pikachu’s body, we used multi-color printing this time. Throughout the entire file, only Pikachu’s main body has a layer height of 0.08 mm, while other areas are printed at 0.2 mm. Users can adjust these settings according to their needs. After assembly, we recommend testing the circuitry and switches thoroughly before securing everything in place. The finished result is shown below: