Filament Drying Oven
- 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PETG
Designer - 0.2 mm layer height, 5‑layer walls, 100% infill density
1-disc
PETG
Designer - 0.2 mm layer height, 3‑layer walls, 20% infill density
1-disc
PETG
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PETG
Designer - 0.2 mm layer height, 2‑wall walls, 15% infill density
1-disc
PETG
Designer
15
0
When you don’t need to retract the filament, pull the knob out slightly; when retraction is required, press it in to lock the internal gear and initiate retraction. All gaps are sealed with gaskets, ensuring excellent airtightness.
Note: FDM printing has relatively weak strength in the X and Y directions, so it’s best to reinforce areas near the snap-fit joints with strong adhesive. Also, avoid using overly thick sealing strips to minimize stress on the snap-fit connections.
Model body reference: CC2 Compatible Material Box (Body) - (0.o) | Nexprint: Free 3D Model Downloads
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(5)
- 牙盘.3mfDesigner
844.18 KB
2026-06-24
- 配件.3mfDesigner
1.92 MB
2026-06-24
- 密封箱主体.3mfDesigner
956.34 KB
2026-06-24
- 密封箱盖子.3mfDesigner
249.80 KB
2026-06-24
- 干燥盒.3mfDesigner
120.31 KB
2026-06-24
View all(5)
