GIF
Sweet Valentine Design Contest
Love and Care
Valentine’s Day Gift
Love-filled Valentine’s Day
Valentine’s Day Heart-Shaped Ornaments
0.2 mm layer height, 2‑wall walls, 25% infill density
2-disc
PLA
Designer
26
1
These heart-shaped pendants are crafted using a hot‑press molding process and can be filled with chocolates or small gifts. The design was inspired by this overseas blogger: https://makerworld.com.cn/zh/@GLB_mihai_t/upload
When printing, set the top and bottom layers of both models to 0 and use spiral infill, as shown in the image below.
The production process is straightforward: soften the model with a hairdryer, press it firmly against the mold, then let it cool before carefully removing it.
Once completed, simply bring the two heart shapes together, secure them with the locking clasp, and fasten the tail-end snap—your pendant is ready!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
热压心_1.stlDesigner
671.08 KB
2026-01-20
- 热压心模型_2.3mfDesigner
627.84 KB
2026-01-22
