Dog as a phone stand with single or multicolor print
Small, light and usefull

You can use it as a 
- Toy / decoration (without a hole for a phone)
- Phone stand
- Keyring

---

If you want to sell prints of this models you can buy a commercial license here:
https://cults3d.com/en/3d-model/gadget/dog-phone-stand-commercial-license

---

Check out more models from Phone collection
https://www.printables.com/@C47_3d/collections/793008

---

There is a full body model and models with a space for a phone (8-16mm thickness - as in file names and on the bottom of models)
Phone will be at 12° angle. Should work with horizontal and vertical placing with most of the phones

To resize the models use the equasion:
‘Needed space (in milimeters)’ divided by ‘model number’ multiplied by 100% = ‘Needed model size in percent’
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

---

KEYRING
To make a keyring use a model of your choice and add a Dog_xKeyring-Addon
Both models should be in the exact same position in your slicer to be sure that they will merge properly
Then select both models and merge them (right click menu)
You can also select both files, drop them in the slicer and click YES  when asked if to merge them
After merging you can easly resize or rotate the model if needed

---

MULTICOLOR
Use a model of your choice and add xMulticolor models to the same place. Then merge all 4 files together
The easiest way is to just select all 4 files, drop them in the slicer and click YES when asked if it's a single model with multi parts - they will be merged automaticly

Recommended colors:
Light or dark brown for a body
Dark brown or black for 'Dark'
White or creame for 'Light'
Red for 'Red' (you can also print with only 3 colors, without Red)

---

Printing tips:
No supports needed
10-15% infill
0.1-0.2mm layer height (I printed with 0.12)
2-3 walls

---